After determining your display needs, make sure you can find a solution that works within your space to deliver maximum impact and functionality.
The wall system requires a minimum ceiling height of 8 feet. At the Premium level, header and overhead light fixture options are available to optimize the system's visual impact. For lower ceilings, Rolling Carts and Half Walls are effective alternatives. To encourage dwell time, 48 inches of aisle space in front of the fixture is recommended. See illustration for specific minimums to meet ADA requirements.
After determining how many linear feet you can devote to bath and kitchen collections, use the chart below to find options that fit your space.
1. Measure the space you have available for displays.*
2.. Use the chart below to find the configuration options that fit your space.
3. View the corresponding display details for more information.
4. Follow the instructions in the How to Order section under Builder Resources once you’re ready to place your order.
* Add 2 inches of height and 1 inch of width for each configuration to accommodate uneven floors in your space. For Premium options, add 9 inches of height if you're selecting an overhead light fixture for Delta, and add 3 inches of height if you're selecting an overhead light fixture for Brizo.
For Premium wall configuration displays only: Electrical is required to power the overhead light and under-shelf lighting (Delta) or ambient frame lighting (Brizo). See schematic for placement of electrical outlets.
For Premium wall configuration displays only:
BRIZO WALL DISPLAY
Each wall unit requires (1) electrical outlet to power its optional lights. A combination of these locations can be used, as well.
DELTA WALL DISPLAY
There are 2 plugs per 4ft section: (1) to power optional overhead lighting and (1) to power optional under shelf lighting. A Duplex outlet may be used if only one 4ft section is located alone.
Due to cord length restrictions, a maximum of 8' is required between the display and the farthest outlet.
Hide cords via cable management covers, paint, or a different suitable method.
Optionally, outlets can be positioned above the top of the displays.
All electrical requirements are the responsibility of the showroom and should be completed before the installation date.
Learn how to order configurations and about delivery timeframes.
